Home › Glossary › Curbless Shower

Accessibility term

Curbless Shower

Definition: A curbless shower, also called a zero-threshold or roll-in shower, is a shower with no raised curb at the entrance, so the bathroom floor continues into the shower.

What is a curbless shower?

A curbless shower has no raised lip at the entry, so the bathroom floor runs straight into the shower. It is also called a zero-threshold or roll-in shower. Instead of a curb holding water in, the shower floor slopes toward the drain.

Getting that slope right is the main design challenge.

Why it matters

With nothing to step over, a curbless shower lowers trip risk and can be used with a wheelchair or walker. The floor must be sloped to the drain so water stays in the shower area.

With no step, a curbless shower is easier for anyone using a wheelchair, walker or shower chair, and it removes a common trip point. It also gives a clean, open look that can make a small bathroom feel larger.

How a curbless shower keeps water in

The International Residential Code, section P2709.1, requires shower floors to slope 1/4 to 1/2 inch per foot toward the drain. Without a curb, the floor often has to be recessed or the drain moved, and some designs use a linear drain at the entry or back wall. A glass panel or a shower curtain can help control splashing, and the whole wet area needs proper waterproofing underneath.

Minimum size and safety rules

  • The IRC sets a minimum shower floor area of 900 square inches, with no side less than 30 inches.
  • Hinged shower doors must open outward.
  • Glass near a shower is a hazardous location and generally needs safety glazing.
  • For wheelchair use, the 2010 ADA Standards set a roll-in shower at least 30 by 60 inches, with no more than a 1/2 inch threshold.

Curbless versus low-threshold

A low-threshold shower keeps a small lip at the entry. It is often simpler to build over an existing floor while still being much easier to enter than a tub.

Learn more

These pages cover related shower options and safety features.

Related Bath Doctor services

Frequently asked questions

Do curbless showers leak onto the bathroom floor?

Not when the floor is sloped correctly to the drain and the area is waterproofed. The IRC requires a slope of 1/4 to 1/2 inch per foot.

Is a curbless shower the same as a walk-in shower?

A curbless shower is one type of walk-in shower. Some walk-in showers still have a low threshold.

Can I put a curbless shower in an existing bathroom?

Often, yes, but the floor may need to be lowered or the drain moved to get the right slope. A contractor can check the floor structure to see what is possible.

Planning a bathroom update?

Ask about your bathroom: Contact Us.